GB-200 high shear polish

18,00 35,00 

High cut polish is used to remove the deepest scratches. This is the first step if the surface is in very bad condition (as long as it is not irreversible damage).

SKU: GB-200 Categories: , Tag:


Product description

This product is designed for use on automotive vehicle surfaces. This polish is used with a hard, smooth grey sponge to achieve the necessary roughening of the surface. It must then be supplemented with GB-300 gloss polish for a perfect finish. In case of dark colours we recommend to use GB-350 polish for a better finish and ANTIHOLOGRAM.


Applications of this polish

For use on automotive paintwork to restore the vehicle’s finish after removing defects with microfine abrasive discs. Use an electric or compressed air powered polisher equipped with a polishing pad.


Instructions for use

Shake the bottle before use. Apply sufficient polish for the paint surface to be worked on. When starting with a dry pad, polish should also be applied directly to the pad to wet the surface. Place the pad over the polish and start the machine. Apply half pressure and reapply the polish until the scratches are removed. Remaining residues shall be removed with a microfibre cloth. To improve the finish continue with GB-300 High Gloss polish using a softer pad. For dark paint we recommend GB-350 Super Gloss and anti-hologram.



Any excess polish on plastics, rubber or adjacent panels should be removed with a microfiber cloth. Avoid breathing dust. Avoid release into the environment. Dispose of contents of container in accordance with applicable local/regional/national/international legislation. Repeated exposure may cause dryness or cracking of the skin.

Additional information


1 pc



Packaging / Dimensions

1 l, 500 ml, 500 ml + Pad Premium 150 mm, 500 ml + Pad Premium 80 mm




150 mm, 80 mm


There are no reviews yet.

Show only reviews in English ()

Be the first to review “GB-200 high shear polish”

Your email address will not be published. Required fields are marked *