Fast cutting polish (2 in 1) GB-250
18,00 € – 35,00 €
Specially designed polish for polishing and buffing in one step, achieving the necessary balance between cut and shine.
Retiro disponible en Barcelona
Normalmente está listo en 24 horas.
This product is designed for use on automotive vehicle surfaces. Specially elaborated for polishing and shining in one step. This polish is designed to achieve with the same sponge the balance between the necessary cut and the perfect shine. Its use is diverse, because depending on the surface and the result to be obtained, it can be applied as a single or complementary process. In the case of a complementary process, extra brightness would be achieved with the GB-350.
Applications of this polish
For use on automotive paintwork to restore the vehicle's finish after removing defects with microfine abrasive discs. Use an electric or compressed air powered polisher equipped with a polishing pad.
Instructions for use
Shake the bottle before use. Apply sufficient polish for the paint surface to be worked on. When starting with a dry pad also apply polish directly to the pad to wet the surface. Place the pad over the polish and start the machine. Half-press and re-apply polish until scratches are removed. Remaining residues should be removed with a microfiber cloth.
To improve the finish continue with GB-300 High Gloss polish using a softer pad. For dark paints we recommend the GB-350 with Super Brightness and anti-hologram.
Any excess polish on plastics, rubber or adjacent panels should be removed with a microfiber cloth. Avoid breathing dust. Avoid release into the environment. Dispose of contents of container in accordance with applicable local/regional/national/international legislation. Repeated exposure may cause dryness or cracking of the skin.